Avoid a Hot Home With a Superior Residential Air Conditioning Repair in Glendale, AZ

by | Mar 18, 2016 | heating-cooling

The HVAC (heating, ventilation and air conditioning) system is probably the most commonly used comfort appliance around. One reason for this is the ease of use that this appliance offers the user. Most HVAC systems can be set by adjusting the thermostat or setting a switch on the appliance and then adjusting the temperature setting. Sadly, the HVAC has been known to fail on occasion and require an expert Residential Air Conditioning Repair in Glendale AZ.

The AC portion of the HVAC is split between the indoor air exchanger and an outdoor condensing system. The primary reason for this separation is the need to exhaust any collected heat outside of the home. This is required because the condenser unit can accumulate quite a bit of heat, and this heat must be released, or it could affect the function of the appliance.

Another reason that the heat is released outdoors is based on the way the appliance works. That is, the unit will compress a chemical refrigerant, and this process forces the refrigerant into a state change. This has a few effects such as lowering the temperature of the refrigerant. The result is a chemical that can accumulate heat found around the coil. As this heat is collected, it lowers the temperature of the metal. The next part of the process is forcing air through the evaporator coil so the cold temperature of the metal can be spread throughout the building.

Perhaps the most important Residential Air Conditioning Repair in Glendale AZ is routine maintenance. This procedure should be performed at least once each year, depending on how heavily the appliance is used. Maintenance should include cleaning specific areas of the system such as evaporator coil and portions of the air exchanger.

Unfortunately, no matter how well the appliance has been maintained, it will eventually fail. This could be due to old age or extended use, but it might also be due to a repair that is too expensive to justify. This usually occurs when a vital part in an older appliance breaks and the cost of the component is too expensive, or the part is difficult to locate. Many experts will recommend replacing such a system because the new model will usually provide better air treatment and added energy savings. Visit the website at Gonzaleshc.com to learn more.

Like us on Facebook.

Latest Post